Front burner wouldn't light before a family barbecue. Igniter was coated in grease. A scrub of tip and ports and it caught immediately.
Burners that spark but won't catch, coils that only run hot, or a glass zone that stays cold. Gas, electric or induction, we find the faulty part and get your cooktop working again.
Common Calls
Every common stove fault in one view: what you'll see, why it happens, how we fix it, and what to do before we arrive.
| Problem | What You Notice | Likely Cause | What We Do | While You Wait |
|---|---|---|---|---|
| 01Won't Light | The igniter clicks but the burner never lights. |
Food residue on the igniter, clogged burner ports or a misaligned cap. IgniterBurner capBurner head |
Clean and reseat the burner parts, then test ignition. |
Clean the white igniter tip gently with a dry brush and center the cap. |
| 02Stuck On High | The coil glows bright red on every setting. |
Its infinite switch has failed in the on position. Infinite switchTerminal blockWiring |
New switch, plus an inspection of the connections behind the panel. |
Kill power at the panel if the knob can't. |
| 03Cold Burner | One burner stays cold while the others work. |
A broken element or a burned socket. Coil elementReceptacleSwitch |
Swap coils to test, then replace the element or socket. |
Move the cold coil to a socket you know works. |
| 04Weak Flame | The flame burns yellow or uneven and leaves soot. |
Clogged burner ports or a misadjusted air shutter. Burner headAir shutterOrifice |
Clean the burner and adjust the air-to-gas mix. |
Clear ports with a pin, never a toothpick. |
| 05Constant Clicking | The igniter keeps clicking after the burner lights. |
Moisture from a spill or a worn spark switch. Spark switchSpark moduleIgniter |
Dry and test the switch, replacing it if it keeps firing. |
Let the cooktop dry for a few hours after a spill. |
| 06Glass Top Fault | One zone stays cold, or letters appear on the display. |
A failed radiant element or limiter, or a control fault on induction models. Radiant elementLimiterControl board |
Test first, because replacement glass isn't cheap. |
Don't use a cracked surface, and note which zone is out. |
From the builder-grade units in new Hays County subdivisions to premium kitchen suites, our technicians work on every major make you'll find in a Buda home.
Don't see your brand? Call us anyway; chances are we repair it too.
Choose your brand to see the codes that make most often shows. Meanings may shift slightly between model years.
The electronic control has failed.
The range's oven sensor circuit is open.
The self-clean door lock isn't working properly.
Whirlpool control fault.
The oven temperature sensor is out of range.
Power was interrupted; reset the clock.
Hot-surface indicator; the glass is still warm.
Child lock engaged; hold down the lock button to clear it.
Induction can't detect a compatible pan.
Code still showing after a five-minute power cut? Then book a technician for a proper diagnosis.
Feedback from Buda households after a stove visit.
Front burner wouldn't light before a family barbecue. Igniter was coated in grease. A scrub of tip and ports and it caught immediately.
One coil only worked on high. Infinite switch replaced. Simmers properly now.
Back burner wouldn't heat. Scorched receptacle, ordered, fitted on visit two.
Flame was yellow and sooty. Ports opened up and the shutter tuned.
Igniter kept clicking after lighting. Spill had soaked the switch. Replaced.
Glass top zone stopped heating. Limiter replaced, glass untouched.
Several cooktop complaints end with these six checks.
Clean the ports
Remove each cap and open the tiny ports with a pin. Clogged ports cause weak or uneven flames.
Seat the caps
Make sure each cap sits flat and centered. An off-center cap keeps the spark from the gas.
Dry the igniter
Give a soaked burner time to dry completely. Moisture keeps igniters clicking.
Check the breaker
An electric range draws from both halves of its breaker. One tripped side leaves some zones cold.
Swap a coil
Move the cold coil to a burner position that works. If it warms up, replace the original socket, not the coil.
Unlock the panel
Unresponsive panel? Press and hold the lock key for three seconds.
Still not cooking right after all six?
Book A VisitDrop your name and number below, and someone from our office will ring you to set a time. Let us know the make and what's going wrong so the technician brings the right parts.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.